Two Process Blocks on a Street Light Production Line: Pole Anti-Corrosion and Luminaire Burn-In

1. Industry Overview
Municipal lighting and rural brightening projects buy in urgent batches — delivery pressure concentrates and custom models run high. A street light production line — the trade also says street light assembly line — covers two process blocks: pole fabrication and luminaire assembly. Poles run the sheet-metal sequence of coil flattening, CNC cutting, cone bending on heavy brakes, seam welding, grinding and patching, hot-dip galvanizing and powder coating — the galvanizing pass is the root of pole life; luminaire assembly works board, driver, sealing and burn-in station by station.
2. Process Flow & Line Configuration
The typical LED street light luminaire flow: incoming board check → thermal grease and board locking → driver installation and wiring → lens and gasket assembly → shell closing and locking → waterproof check → light-on first test → to burn-in cabinets for on/off aging (24 h and up) → photometric sampling → labeling and packing. In a delivered project, the luminaire section of the street light production line runs a green belt conveyor with aluminum-extrusion track, pneumatic components and air lines routed overhead, green plate-shaped luminaires flowing neatly; green workbenches line up in parallel, six to eight stations, with burn-in and test cabinets alongside.
3. Configuration & Selection Tips
The pole line's heavy sheet-metal machines and the luminaire section live in separate bays: poles run ten-odd meters, their lanes served by cranes and long-material carts, strictly apart from the belt lanes. With burn-in cabinets concentrated, extraction and power distribution rate at full load on dedicated circuits. Export models on the LED street light assembly line get driver-swap and label stations, entering burn-in only after voltage-standard checks; photometric sampling frequency follows project orders, records archived for reference.
4. Delivery & Service
From head power classes and daily program, Tuoye — in Wenling, Taizhou, Zhejiang, China — issues the street light production line proposal with burn-in and test-section equipment lists attached; equipment enters after in-plant pre-assembly and commissions through trial production. One-year machine warranty, belts, tooling and cabinet parts supplied long-term, plus luminaire-section expansion and pole-section integration.
Permanent link: https://www.liushuixian.com/post/two-process-blocks-on-a-street-light-production-line-pole-anti-corrosion-and-luminaire-burn-in.html
Disclaimer: Some articles on this site are compiled from public technical sources for reference. If any content infringes your rights, please contact us for removal. Please credit the source when reprinting.


















