The Test Section of an Agricultural Drone Assembly Line: Bench Power and Spray Flow Calibration

Test section of an agricultural drone production line

1. Industry Overview

Plant-protection drones iterate fast and carry high unit value — line flexibility is the first measure of manufacturing capability. A drone assembly line — the trade also says UAV production line — completes multicopter assembly from frame through flight testing. Class-wise, 22-50 L tank electric multicopters are the plant-protection mainstay, with surveying, inspection and logistics forms alongside. Quality evaluation follows NY/T 3213 for plant-protection UAVs — the same code behind subsidy-class testing — so line inspection records must line up with it.

2. Process Flow & Line Configuration

The typical multicopter assembly flow: center frame assembly → motors and ESCs mated → flight control and RTK installed and wired → arm-folding mechanism → tank and spray system assembly → cowling and landing gear → whole-unit bench power test → flight-control calibration → flight test → cleaning and packing. In a delivered project, the drone production line runs speedchain with round rotating pallets — four-arm work with no repositioning; blue ESD flooring and pegboard racks at every station, and whole-unit bench test positions at the line side locking props nose-down for power testing.

3. Configuration & Selection Tips

A multicopter assembly line takes full finished-electronics ESD — floor, pallet and wrist strap on three-point grounding, ionizers added at propeller stations against the static dust-attraction of carbon and plastic parts. The spray-flow calibration bench on the plant-protection drone line carries adapters per nozzle type, each nozzle's flow deviation archived for subsidy inspections. The test section is the capacity bottleneck: expansions add bench slots and flight-ground connections first, with assembly and test beats balanced in the same calculation.

4. Delivery & Service

From machine parameters and monthly capacity, Tuoye — in Wenling, Taizhou, Zhejiang, China — issues the drone assembly line proposal with test and assembly beats balanced together; equipment enters after in-plant pre-assembly and commissions through trial production. One-year machine warranty, pallets and test stands supplied long-term, plus test-section expansion on existing drone assembly lines.